From Multi-SKU Depalletizing to Mixed-Order Palletizing: Making Carton Handling Easier with ALSONTECH 3D Vision

2026-11-11 09:25

As product varieties and order requirements continue to grow, warehouse automation systems face increasing demands for material recognition, robotic handling efficiency, and flexible order fulfillment. To improve warehouse operations, a large seasoning manufacturer planned to establish a fully automated, unmanned warehouse, covering automated material handling from inbound storage to outbound order fulfillment.

In this project, the production management system sends order requirements to the warehouse. A 3D vision system identifies large stacks of cartons on pallets, locates individual cartons, and guides robots through rapid depalletizing for efficient automated inbound and outbound handling. At the downstream packing station, 3D vision algorithms work with the Warehouse Management System (WMS) to identify, pick, and combine different carton types according to order requirements, enabling order-based mixed palletizing.

To address challenges such as tightly stacked multi-SKU cartons, reflective packaging tape, warehouse ambient-light interference, and large-pallet handling, ALSONTECH provides a laser 3D vision solution. Combining multi-SKU AI recognition, large-FOV 3D imaging, and flexible camera configurations, the solution delivers reliable visual guidance for robotic depalletizing and mixed-order palletizing.

ALSONTECH 3D vision for multi-SKU carton depalletizing and mixed-order palletizing

1. When Cartons Crowd Together, How Can Robots Pick the Right One?

In real warehouse environments, cartons of different types may be tightly packed with little or no space between them. Robots must identify each carton type while determining its position, orientation, and accessible picking area.

Occlusion and close contact between cartons can make reliable recognition and positioning more challenging, especially when the system relies primarily on 2D image information.

The ALSONTECH 3D vision solution supports recognition of multiple carton types. Preset models are available for common carton categories, helping simplify deployment. For special carton types, additional models can be developed through on-site image collection and AI deep-learning training. Depending on the site conditions and available image data, deployment of a model for a special carton type can take approximately one hour.

By combining recognition with 3D spatial information, the system provides carton position and orientation data to guide robotic picking.

2. Reflective Tape and Changing Light: Keeping 3D Imaging on Track

Transparent or reflective sealing tape on carton surfaces can create bright reflections that make it more difficult for vision systems to obtain consistent image information.

Warehouse lighting adds another challenge. Overhead light strips, changing illumination, and different lighting conditions across workstations can all affect imaging performance.

ALSONTECH uses laser 3D imaging to capture the three-dimensional profiles and spatial information of cartons. Rather than relying solely on surface color and texture, laser 3D vision provides spatial data for robotic positioning and supports carton handling under different ambient-light conditions and reflective surface conditions.

3. Beyond Depalletizing: Building Mixed Pallets Around Orders

In order-driven warehouse operations, depalletizing is often only the first step. After cartons are picked, different product categories may need to be recombined on destination pallets according to individual orders.

The system therefore needs to do more than identify which carton to pick. It must also coordinate carton recognition, picking, and placement with the downstream palletizing requirements.

The ALSONTECH solution supports both offline and online mixed-order palletizing algorithms. Based on the actual workflow and order information, the system can plan how different carton types are combined, helping connect depalletizing with order-based palletizing operations.

4. Large Pallets, Tall Loads—Can the Camera See Enough?

Large pallets and tall stacks place greater demands on camera coverage and spatial perception. If the camera’s field of view is insufficient, the system may need additional scans or camera-position adjustments, potentially affecting overall operating efficiency.

ALSONTECH large-FOV laser 3D cameras capture 3D information across a wider working area, helping the system perceive pallet and carton-stack conditions at different positions and heights.

For each project, the required field of view should be evaluated against pallet dimensions, maximum stack height, camera working distance, and the available installation space.

5. Fixed or Eye-In-Hand Choosing the Right Camera Setup

Warehouse workstations differ in their layouts, available space, and robot configurations. The camera installation method should therefore be selected according to the actual application.

For workstations with a defined operating area that needs continuous coverage, an Eye-To-Hand configuration can be used. The camera is mounted in a fixed position above or beside the working area and does not move with the robot.

For applications where the camera needs to move with the robot to observe different picking positions, an Eye-In-Hand configuration may be more suitable. ALSONTECH’s logistics-specific laser 3D camera features a compact and lightweight design, helping reduce the impact of camera weight on robot payload and movement flexibility.

The choice between Eye-To-Hand and Eye-In-Hand depends on the robot’s working range, site layout, required field of view, and cycle-time requirements.

6. High Robustness for Demanding Warehouse Operations

Warehouse automation systems are often expected to operate continuously over extended periods. A vision system must not only recognize cartons during individual picking operations, but also maintain stable perception throughout ongoing production.

The ALSONTECH 3D vision solution is designed to support stable operation in demanding warehouse environments, with system operational stability of up to 99.99%. This provides reliable 3D perception support for multi-SKU carton recognition, continuous robotic depalletizing, and mixed-order palletizing.

With appropriate installation, commissioning, and operating conditions, stable 3D perception helps robots consistently obtain carton position and orientation information, reducing the impact of unstable visual input on automated workflows.

7. Bringing Depalletizing and Mixed Palletizing Together

From multi-SKU carton recognition and 3D imaging on reflective surfaces to order-based mixed palletizing, ALSONTECH 3D vision provides perception capabilities for automated warehouse operations.

The solution can be configured with either Eye-To-Hand or Eye-In-Hand installation, depending on project requirements. By combining large-FOV imaging, AI-based carton recognition, and mixed-order palletizing algorithms, it helps robots handle complex carton depalletizing and palletizing tasks more flexibly.

8. What Should Be Checked Before Deployment?

To ensure that the 3D vision system fits the actual warehouse environment, several key factors should be confirmed before deployment:

- Carton samples and product categories:Provide carton dimensions, appearance, sealing-tape details, and surface materials for each category. This helps determine whether preset models are suitable or additional AI training is required.

- Pallet dimensions and stacking patterns:Confirm pallet size, maximum stack height, carton arrangement, and whether cartons may be tightly packed, tilted, or irregularly positioned.

- Site environment and installation space:Confirm the camera mounting position, working distance, field-of-view coverage, and warehouse lighting conditions, particularly overhead light strips and other potential sources of ambient-light interference.

- Robot and end-of-arm tooling:Provide the robot model, working envelope, end-effector type, and payload limits to help evaluate the appropriate Eye-to-Hand or Eye-in-Hand configuration.

- Order and palletizing workflow:Clarify where order data comes from, how mixed-palletizing rules are defined, whether planning is offline or online, and how data is exchanged between the vision system, robot, and warehouse management system.

- On-site testing and cycle-time validation:Test actual cartons under real lighting and operating conditions to verify field-of-view coverage, recognition and positioning performance, camera-related processing time, and the complete workflow.

Confirming these factors in advance helps determine the appropriate camera model and installation method, making it easier to integrate 3D vision into the existing warehouse automation process.

Frequently Asked Questions (FAQ)

1. Can ALSONTECH 3D vision recognize cartons of different types and sizes?

Yes. Preset recognition models are available for common carton categories. For special carton types, additional models can be developed through on-site image collection and AI deep-learning training.

2. Will reflective tape on cartons affect recognition?

ALSONTECH laser 3D imaging captures three-dimensional profiles and spatial information, supporting imaging under reflective surface conditions and different ambient-light environments. Actual performance should be verified using the cartons and lighting conditions at the project site.

3. How should I choose between Eye-To-Hand and Eye-In-Hand?

The choice depends on site layout, robot working range, field-of-view requirements, and end-of-arm payload limits. Eye-To-Hand is suitable for fixed working areas, while Eye-In-Hand can be considered when the camera needs to move with the robot.

4. What is the system’s operational stability?

The ALSONTECH 3D vision solution offers system operational stability of up to 99.99%, supporting continuous 3D perception and automated warehouse operations.

Conclusion

Multi-SKU carton depalletizing and mixed-order palletizing place demands not only on robotic picking, but also on carton recognition, positioning, environmental adaptability, and long-term operational stability.

With laser 3D vision, AI-based multi-SKU recognition, large-FOV imaging, and flexible camera configurations, ALSONTECH provides reliable 3D perception support for complex warehouse automation applications, helping robots handle depalletizing and mixed palletizing more efficiently.

Facing challenges in automating multi-SKU carton depalletizing and mixed palletizing? Contact ALSONTECH to explore a 3D vision solution tailored to your application and take the next step toward smarter warehouse automation!

  • Company name*

  • Name*

  • E-mail*

  • Phone*

  • Requirements details*

E-mail
info@alsontech.com
Contact us
Please leave us a message, we will contact you within 24 hours.
Wechat
Wechat
Add customer service
Whatsapp
+86-18037868518